• 典型案例/Case

    聯系我們/Contact

    電話:86-512-65989790 65989792
    傳真:86-512-65989791
    地址:蘇州市吳江區夏蓉街399號稻谷互聯網產業園5-902

    您現在的位置:首頁 >> 典型案例

    典型案例/Case

    某電鍍廠9條電鍍線車間廢氣收集和處理系統

     9 electroplating lines workshop waste gas collection and treatment system of an electroplating factory
    工程簡介 Project Information
      電鍍車間共有9條電鍍線,每3條電鍍線鹽酸廢氣集中收集,合用1套廢氣處理系統處理,單套系統設計處理量為24000m3/h。另外設置2套電鍍線酸洗槽抽風罩廢氣收集處理系統,避免電鍍線酸洗槽在開啟頂蓋時將大量酸性氣體釋放到生產車間,單套系統設計處理量為30000m3/h。
      考慮不影響車間內原有布局并充分利用空間,將5套臥式廢氣處理塔安置于電鍍車間內附房樓頂,處理后廢氣由管路引出車間,經煙囪排放,達到《大氣污染物綜合排放標準》(GB16297-1996)的要求。
    There are 9 electroplating lines in the electroplating workshop. In this case, every 3 electroplating lines share a hydrochloric acid waste gas collection and treatment system. The single system capacity is 24000m3/h. There are other 2 waste gas collection and treatment systems which used to collect and treat the gas from suction guards of closed pickling plating. The single system capacity of these is 30000m3/h.
    To avoid the influence the workshop’s original layout and to make full use of the space, these are 5 sets of horizontal waste gas treatment towers arranged on the auxiliary room roof in electroplating workshop. Eventually waste gas discharges meets the standard < Integrated emission standard of air pollutants > (GB16297-1996).

    流程圖 Flow-process Diagram

    上一篇  下一篇
    返回 >>
  • 日本成本人av资源